IPM IP-02S, Руководство по эксплуатации

Страница: 11 / 33

11
4.0 IP-02 Maintenance & Repair Section
4.1 Air Motor Disassembly Procedure
1. Follow the Procedure For Pressure Relief on page 9. It is very important to relieve
all air and fluid line pressure, as well as pump pressure before proceeding to the
next step or injury can occur.
2. Remove inlet and outlet hoses. Place the pump in a vise or other holding device.
If you know that you just need to work on the air motor, the pump can simply be left
in the drum it is operating in.
3. Clamp on the housing with the outlet hole against one of the jaws of the vice.
When clamping the housing- either the air motor assembly or the lower tube and/or
foot valve can be removed.
Use a strap wrench to remove the air motor assembly.
The pump assembly can be removed from the air motor by disengaging the Piston Rod.