Section II
Installation
Page 2.4
BP
II S, 3.00
08/96
2.4 Activating the Batteries
Make sure that all packing material has been removed from the battery section. If
foam blocks are inside the battery trays, leave them in place. They are to keep small
batteries from moving around inside the trays.
0.
1. Connect the batteries as shown in Figure 2–2. The two connectors (red and
black) are connected together to provide the final connection for the battery
system.
2. Replace the side panels and top of the UPS cabinet.
The uninterruptible power system is now ready for startup. See Section III,
Operation.
WARNING
Do not close the battery circuit breaker until instructed to
do so in the startup procedure.
