background image

User Guide

IPico™ WN400 Integrated Access Device

User Guide © 2001 Lucid Voice

30

Delete entry first. 

This error indicates that you attempted to save a 

new entry that already exists. You should remove the old entry first. 

Invalid IP address. 

The IP address you entered is invalid. IP addresses 

should be entered as 4 numbers between 0–255 separated by periods, e.g., 
192.168.1.1. 

Invalid telephone number. 

The telephone number you entered is 

invalid. A telephone number should contain digits only. You should not 
put any type of separator between the digits such as spaces, hyphens, or 
periods. 

IP address is multicast. 

The IP address you entered is a multicast 

address. Multicast addresses are IP addresses larger than 224.0.0.0, and are 
not allowed. 

Invalid mask address. 

The mask you entered is invalid. A valid mask 

is a mask that, when converted to binary, contains a series of ones 
followed by a series of zeros (read from left to right), e.g., 255.255.255.0. 

Invalid password. 

The password you entered is incorrect. 

Not authorized or password timeout. 

Normally, this error means 

that there has been a timeout since your last login. You should log in 
again. 

Telephone number already exists. 

The telephone number you 

wanted to add already exists in the database. 

Invalid CIR, should be between 1 Kbps and 102400 Kbps 

You 

entered an invalid CIR. You should enter a number between 1–102400 
Kbps, or enter ‘0’ or ‘unlimited’ to disable QoS. 

IP address is not in the correct IP subnet. 

The IP address you 

entered is not the correct subnet. 

System Error! 

System error. This means that the system tried to 

execute the new values you entered but failed. 

Содержание WN400-O




































Отзывы:

Похожие инструкции для WN400-O