User Guide
IPico™ WN400 Integrated Access Device
User Guide © 2001 Lucid Voice
20
Current Settings.
This button will display the last saved settings.
Defaults.
This button will restore factory default settings.
C O M m a n d e r C o n f i g u r a t i o n T o o l
The COMmander is a serial configuration tool that should be used when
the IP address of the IP
ico
is not known. The COMmander tool allows
you to change the IP parameters to the default settings or to any other
required value. Note: changes are saved and take effect immediately after
new settings are entered.
1. Using a crossover serial cable, connect a laptop or a workstation to the
IP
ico
unit. You may use either serial port, COM1 or COM2.
2. From Windows 95/98/2000, click
Start
, then click
Run
.
3. In
Open
, type ‘Hypertrm.exe’
to start HyperTerminal.
4. Choose a name for your IP
ico
connection (any name will do).
5. Click the
Connect using
dropdown menu and choose the serial port
(COM) your serial cable is connected to.
6. Change port settings as detailed in Appendix A.
7. Click
Dial
.
