IPico™ WN400 Integrated Access Device
User Guide
User Guide © 2001 Lucid Voice
11
Placing a Call
To place a call to the PBX from an extension connected to an IP
ico
device,
lift a handset and dial a four-digit extension (the leading digits of the
remote IP
ico
unit, followed by the port number) of any FXS port
connected to the PBX. In the system illustrated below, you can dial ‘2000’
to reach the PBX. You will connect to the PBX as if you had called from
an external location.
To place a call from extensions connected to the PBX to an extension
connected to an IP
ico
device, dial the extension of the outside line
connected to the IP
ico
unit (assigned by the PBX) and then dial the four-
digit IP
ico
extension of the party you wish to reach.
For example, from the PBX extension, you would dial ‘8’ (or whichever
prefix your PBX has assigned to the IP
ico
device) to connect to the IP
ico
unit, and then the four-digit extension of the party you wish to reach. For
example, to reach the extension connected to Port 3 of the IP
ico
unit in
the illustration below, you would dial ‘8-3003’.
Note:
Please refer to PBX documentation for PBX configuration
information.
