IPG YLS-1000-K, Перевод оригинального руководства по эксплуатации

Страница: 82 / 171

​ | LaserNet software
82
YLS-K
Laser\ Change
Access Right
In the submenu Change Access Right , you can change between four dif-
ferent password-protected access levels. The following access levels are
available:
• Monitoring
• Operator
• Engineer
• Supervisor
The currently selected access level is marked with a check mark. The
various user rights can be viewed via the menu path
Extras\Access
Rights .
When changing from one access level to another, a password must be
entered. By default, no password is set. However, the Supervisor can set
and change passwords for all access levels via the menu path
Extras\Ac-
cess Rights .
Setting the Supervisor password
The system owner can set the Supervisor password
the first time the LaserNet software is started via the
menu path
Extras\Access Rights .
Laser\ Reset Criti-
cal Errors
If the laser reports the alarm Critical error, you cannot reset the error
by pressing the Reset button. You can only reset a critical error by en-
tering a code.
Figure 40: Reset Critical Errors
The code can be obtained by contacting the competent IPG service de-
partment (see
Resetting critical errors [
}
139]
).