IPG YLS-1000-K, Перевод оригинального руководства по эксплуатации

Страница: 81 / 171

81 YLS-K
8.6.2 Configuration menu
Optional functions
Depending on the laser configuration and the se-
lected operating mode (TEST/ROBOT), some func-
tions may not be available in LaserNet. The unavail-
able options are shown in gray in LaserNet.
IP Configuration
In the submenu IP Configuration , you can change the laser name and the
IP address of a laser as well as activate or deactivate a laser.
Figure 38: IP Configuration activated
The laser name is used for identification if you control and monitor
multiple lasers with one computer. Ensure that you assign each laser a
unique name. In the
IP address column, the IP address for the laser with
the corresponding name is assigned. If an active connection to a laser
exists, the button IP Properties becomes available (only in
Supervisor
Mode ). Clicking on this button opens an input window in which you can
change the IP address of the laser.
Figure 39: IP Properties
​ | LaserNet software