iPECS eMG100 Скачать руководство пользователя

Страница: 9 / 35

iPECS eMG80/100 & eMG800 & UCP
User Portal User Guide

Issue 1.4

4.2

Call Forward

Call forwarding user options allow you to set up your phones to forward calls to another number.

Checking point

Please ask your administrator if the following admin. attributes is set in advance.

Station Data > Common Attribute (111) > Call Forward:

Check the destination type



Station Group: Station Group Data > Station Group Overview: check

Group number

and Member

list.



Voice Mail: Station Group Data > Station Group Overview: check if there is

Group Number of VSF-

Speed Dial Number is System speed & Station speed. System speed is programmed as below and selects the

desired index. But Station speed is programmed by pressing [PGM] and [Speed] button.

The range of System & Station speed number is different according to the system: check [System ID (100)] >
‘

Speed Numbering

’.



System speed: System Data > System Speed Dial: check the

index

including Programmed number

(Dial digit) and Name.



Station speed: Station Web (Old) > Station Speed Dial: check the

index

including Programmed

number (Dial digit) and Name.

Operation

In the below window, you can set the call forward option as the following steps:

Set Call Forward to ON.

If you set the call forward ON, the following settings are available as your situation.

Use the drop-down list box to configure Call forward condition:



Unconditional (Always): all calls to the station are forwarded internally or externally immediately upon

receipt except recalls.



Busy: If the station is busy, forwards all calls to the selected station except recalls.



No Answer: Forwards all calls to the selected station when the station does not answer within the No

Answer timer except recalls.



Busy or No Answer: Forward all calls if the selected station is busy or does not answer within the No

Answer timer.

Use the drop-down list box to select Destination type:



Station Number: Select the station number.



Station Group/Voice Mail: Select the station group number which the station is included, or forward

to Voice mail to record.

Содержание eMG100




































Результаты поиска

Содержание eMG100

Отзывы:

Похожие инструкции для eMG100

Бренды по названию

Популярные бренды

iPECS eMG100, Руководство пользователя

Результаты поиска

Содержание eMG100

Отзывы:

Похожие инструкции для eMG100

Бренды по названию

Популярные бренды