IP autoscript WinPlus-IP, Руководство по установке и эксплуатации

Страница: 172 / 265

Page | 171
Once a connection is established, connection timeout no longer comes into play.
The timeout adjustment is made by a slider. The range is 1000ms to 6000ms
Please Note: increasing this timeout range may help where there are slow network connections
Encoding
To enable compatibility of the encoding used to transfer data from iNews to WP-IP click on the pull
down to select the appropriate encoding
Use Encryption
When enabled WP-IP will only be able to read encrypted messages sent from iNews.
When disabled WP-IP will not be able to read encrypted messages sent from iNews
Passive Mode
When Passive Mode FTP is enabled the connection is only one way, i.e. WP-IP connects to the iNews
server so only one direction of firewall needs to be opened. Passive only needs ONE direction of
firewall open.
When unchecked (Active Mode FTP) the iNews server connects BACK to WP-IP to send stories. This
means connections are made in BOTH directions, requiring firewalls to be opened in both directions.
Please Note: Passive Mode FTP can consume more network connections to the iNews FTP server than
Active Mode FTP. When the number of connections are limited it may be better suited to use Active
Mode FTP, because then half the time the iNews server connects to WP-IP, which does not consume a
connection.
In either case, the iNews FTP server itself may not be configured to support both Passive and Active
options. Please consult with your iNews administrator to confirm the best mode of operation.