IP autoscript WinPlus-IP, Руководство по установке и эксплуатации

Страница: 126 / 265

Page | 125
Adjusting the Interline Spacing
The size of the gap between the horizontal lines of text is referred to as interline spacing.
This can be adjusted either by typing a number into the number box, where 0.00 is the minimum
spacing and 1.00 is the maximum, or by dragging an arrow in the Prompt Preview window when
layout is selected.
Please Note: Changes to interline spacing will not affect the spacing in the Story Editor pane but the
guide brackets will resize automatically
The illustration below shows the default spacing and the position of the adjustment arrow (Marked
with a red dot) and the corresponding text in the Story Editor window. The number box shows 0.00.
The illustration below shows the output after the arrow has been dragged down to increase the
interline spacing and how the guide brackets in the Story Editor have correspondingly reduced. The
number box shows 0.32.
Resetting the Prompter Preview Output Formatting
To reset the formatting click the burger then Layout then Reset Layout
To exit layout mode, click the burger
then Layout again.
The adjustment markers will no longer
be visible.