IP autoscript WinPlus-IP, Руководство по установке и эксплуатации

Страница: 164 / 265

Page | 163
Please Note: Responding to the <roReqAll> MOS message is a part of the standard MOS connection
sequence. The Initialise Run Order List option is only to increase compatibility with NRCS which do not
follow the MOS Protocol correctly.
On every connect: A <roReqAll> will be sent with every connect. The available run orders list will be
populated with MOS active runorders every time.
On initial connect: An <roReqAll> will be sent with the initial connection. If a connection to the NRCS
has been lost or a connection is re-established the existing run order will not be deleted from WP-IP
and reloaded.
Never: "Auto Load MOS-Active Run Orders" will be automatically checked as disabled so the user will
not be able to uncheck it. The <roReqAll> will not be sent when the newsroom connects. This means
the available run order list will initially be empty - it will not display any currently MOS-active
runorders. When a runorder is made MOS-active in the newsroom, it will automatically appear in the
Run Orders list.
Please Note: If a run order was already MOS-active when the newsroom connected, it will need to be
deactivated first.
Auto Load MOS-Active Run Orders
When connected to a MOS NRCS any run orders which are made MOS active in the NRCS will
automatically load into WP-IP.
This negates the need to click the “Open Run Orders from newsroom button” and then select the
required run orders.
When unchecked MOS active run orders will not be automatically loaded. They must be added in the
usual way by clicking the “Open Run Orders from newsroom” button and then selecting the required
run orders.
Preserve Current Run Order If Made Inactive on Server
When selected, if a run order is made inactive in the MOS NRCS the run order will not be deleted
from WP-IP. The status will show as INAC (abbrv. Inactive) in the Run Orders window
Active: Inactive: