IOT-WORKSHOP
DTU-H10X
Wi-Fi/Ethernet to RS485/RS232 Server User Manual
http://www.iotworkshop.com
18
When user enable AP+STA function, the STA port need to keep connected with other router (AP),
or STA port will have to scan the AP frequently, which will affect AP port function and may cause
some data loss.
2.1.4.
One AP One STA Applicatioin
Phone
Laptop
PLC Device
Tablet
W
ir
e
le
s
s
C
o
n
n
e
c
ti
o
n
RS232/RS485
IP: 10.10.100.100
IP: 10.10.100.101
IP: 10.10.100.102
AP IP: 10.10.100.254
STA IP: 10.10.101.100
AP IP: 10.10.101.254
AP
AP
STA
Figure 10.
One AP and One STA Application
Notes:
The AP and STA part of device IP must be set in different subnetwork as the above picture.
2.2.
Ethernet Interface Communication
Device provides one 10/100M Ethernet interface. With this Ethernet interface, user can easily
realize the three interface (WiFi, RS232/RS485, and Ethernet) intercommunication and
networking. Device can configured as
Bridge Mode
or
Router Mode
base on different
networking technology.
Notes:
The Ethernet function is enabled by default. Users may input
“AT+FEPHY=on/off" and
