IONODES HVR8, Руководство пользователя, Страница: 23 / 52

23
support@ionodes.com | www.ionodes.com
10 Basic Operating Instructions
10.1 Powering on the appliance
1. Turn on the monitor(s) and any external peripherals (ex. Printers, External Storage Devices, etc.)
connected to the appliance.
2.
Connect the power cord coming from the power adapter to the appliance.
3. Connect the power adapter to the power outlet. The device will power on automatically.
4. If the power adapter was already connected from a previous session, you can power on the
appliance by pressing the
Power Button on the back of the unit.
5. The appliance will run a series of self-tests. After a few seconds, a series of messages may be
displayed as the various hardware and software subsystems are activated. Under normal
circumstances you should not be asked to respond to these messages. If you are asked to respond
any messages follow the instructions carefully.
6. If this is the first time you are booting the appliance, the Quick Setup Wizard welcome screen will
appear.
7. If the Quick Setup Wizard has already been completed in a previous user session, a Windows login
prompt will be displayed once the appliance has completed its boot up phase.
Note: Default login username is ‘admin’ and default password is ‘admin’
10.2 Powering off the appliance
1. You may initiate a power down of the device by one of two ways:
a. Press the Power Button on the back of the appliance.
OR
b. Click on the Windows START button located on the bottom left of the screen and then click
on the SHUT DOWN button.
2. Both methods above will cause the software to shut itself down properly.
3. The appliance may take a few minutes to complete its shut down.
Warning: Always be sure to follow the proper procedures when turning off the power to the appliance. NEVER disconnect
the power to the device while it is still running or in the process of shutting down. Doing so can cause data
loss, file corruption, system instability and hardware failure