Chapter 6 - Appendix
Technical Questions
For RMA and other questions, please contact your vendor or
check out their online support area!
Please read your
warranty carefully,
as this may vary
between different
vendors!
If you have lost your device ID number, please write down the
serial number and contact your vendor.
For NDAS mode, the drivers need to be loaded on each
computer that wants access to the NDAS device. However, if
you are using Windows Sharing, only one computer needs the
software installed. The other computers will not need it.
To disconnect the NDAS disk, we always recommend using the
option in your Device Management (Device Utility for Mac) if
connected via Ethernet. You can use the ‘Unplug or Eject
Hardware” icon in your taskbar (Eject for Mac) to stop the disk
before disconnecting it from the Device Management. Close all
windows that may be accessing the NDAS device.
About this Manual
This manual covers all versions of the Pleiades NDAS. Images,
firmware and descriptions may therefore slightly vary between
this manual and the actual product you have. When you
upgrade the driver, be sure to check if there is a new manual
available for download.
© Copyright 2006 by Macpower & Tytech Technology Co., Ltd. all Rights Reserved
The information contained in this manual is believed to be accurate and reliable. Macpower & Tytech
Technology assumes no responsibility for any errors contained in this manual. Macpower & Tytech
Technology reserves the right to make changes in the specifications and/or design of this product without
prior notice. The diagrams contained in this manual may also not fully represent the product that you are
using and are there for illustration purposes only. Macpower & Tytech Technology assumes no responsibility
for any differences between the product mentioned in this manual and the product you may have.
- 19 -
