Invivo Millennia 3155A, Руководство по обслуживанию

Страница: 51 / 76

5-9
NOTE
The “pe”setting must be set for the country in which the system is used: 0=USA,
1=France, 2=Spain, 3=Japan, or 4=Canada.
e. Enter all required PROTOCOL COMMANDS as follows:
3155A or
3155MVS
Set to
3150 Series Remote 1 3155MVS
Command (BASE) (REMOTE) (REMOTE) DESCRIPTION
pe (see note) 0 0 0 Frequency Set for Country Used
ph 70 4A 4A
Set Hop Duration (69.4µ/ct)
pk 01 09 09 Set Minimum Packet Length
pl - - - Read Maximum Data Length
pn 02 02 02 Maximum Number of Remotes
pr 08 10 10 Set ARQ Attempt Limit
pt 00 00 00 Set Data Transmit Delay
pv 00 00 00 Slot Timeout Assignment Mode
pw 34 34 34 Base Slot Size
px 0 0 0 Enable ARQ Mode
(0=disable/1=enable)
f. Enter all required STATUS COMMANDS as follows:
3155A or
3155MVS
Set to
3150 Series Remote 1 3155MVS
Command (BASE) (REMOTE) (REMOTE) DESCRIPTION
zb 1 1 1 Banner Display
(0=disable/1=enable)
zc 1 1 1 Escape Sequence
(0=disable/1=enable)
zp 0 0 0 Power Save Mode
(0=disable/1=enable)
zq 0 0 0 Low Power Acquisition
g. When all parameter data is entered into the AB182B radio transceiver’s memory, type
m> <Enter> to save the encoded parameters.
h. Shutdown (Com24 Setup only):
(1) Exit the programming mode by pressing the <Esc> key.
(2) Unplug the 9 Vdc batteries from both pigtailed battery cables (red and black wires).
(3) Unplug the test fixture from the pc and AB182B transceiver. Store test fixture with
batteries for future use.
i. Shutdown (Monitor Setup only):
(1)
Exit the programming mode by pressing the <F12> key.
(2) Turn monitor power off.
(3) Unplug the keyboard cable from the monitor.
(4) Reinstall the top cover on the monitor.