![Invitrogen E-Gel Power Snap Plus Скачать руководство пользователя страница 76](http://html1.mh-extra.com/html/invitrogen/e-gel-power-snap-plus/e-gel-power-snap-plus_user-manual_2085413076.webp)
Safety
Before starting
Before you begin using this product, or any installation or service operation, please read the following
safety information. Attention to these warnings will help prevent personal injuries and damage to the
products.
It is your responsibility to use the product in an appropriate manner. This product is designed for use
solely in laboratory environments, and must not be used in any way that may cause personal injury or
property damage.
You are responsible if the product is used for any intention other than its designated purpose
or in disregard of Thermo Fisher Scientific instructions. Thermo Fisher Scientific shall assume no
responsibility for such use of the product.
The product is used for its designated purpose if it is used in accordance with its product
documentation and within its performance limits.
Using the product requires technical skills and a basic knowledge of English. It is therefore essential
that only skilled and specialized staff or thoroughly trained personnel with the required skills be allowed
to use the product.
Keep the basic safety instructions and the product documentation in a safe place and pass them on to
the subsequent users.
Applicable local or national safety regulations and rules for the prevention of accidents must be
observed in all work performed.
Operation of the E
‑
Gel
™
Power Snap Electrophoresis System is subject to the following conditions:
• Indoor use.
• Altitude below 2000 meters.
• Temperature range: 5 to 30
℃
.
• Maximum relative humidity: 80% (maxiumum relative humidity 80% for temperatures up to 31
℃
,
decreasing linearly to 50% relative humidity at 40
℃
).
• Installation categories (over voltage categories) II; Pollution degree 2
• Mains supply voltage fluctuations not to exceed 10% of the nominal voltage (100–240 V, 50/60 Hz,
1.3 A).
• Mains plug is a disconnect device and must be easily accessible.
• Do not attempt to open the E
‑
Gel
™
Power Snap Electrophoresis System. To honor the warranty, the
E
‑
Gel
™
Power Snap Electrophoresis System can only be opened and serviced by Thermo Fisher
Scientific.
• The protection provided by the equipment may be impaired if the equipment is used in a manner
not specified by Thermo Fisher Scientific.
H
76
E
‑
Gel
™
Power Snap Plus Electrophoresis System User Guide