5.
Select the security type from the
Security type
drop-down menu.
Note:
Contact your IT Systems Administrator for information on security type.
Select from the following options:
• Open
• WEP
• WPA Personal
• WPA2 Personal
• WPA Enterprise
• WPA2 Enterprise
Note:
The above options are available only if
Join Other Network
was selected in Step 3. You
cannot change the security type if you selected an existing network.
6.
Select
Join
to continue or
Cancel
to exit from the
Find and Join a Network
screen.
7.
Depending on the security type you have selected, enter the appropriate passwords and select
Join
.
8.
If all the entered information is correct, the
Network Connection Complete
screen will appear.
Select
OK
to continue.
Note:
If incorrect information was entered the
Network Connection Failed
screen will open.
Select
OK
to continue to the
Security type
screen.
Set up a wired connection
Connect one end of a Ethernet cable to the instrument Ethernet port, and the other end to an Ethernet
port wall plug (see “Rear view of the E
Power Snap Plus camera module and base module”
for port location).
1.
On the
Home
screen, select
(Settings)
.
Chapter 1
Product information
First time instrument setup
1
14
E
‑
Gel
™
Power Snap Plus Electrophoresis System User Guide
