Version 1.10
| Optidrive ODP-2ETHEG-IN |
19
www.invertekdrives.com
6.7.3. Network Settings
The present network settings for the interface are displayed. This data may be changed by the user.
‘Configured’ indicated the values currently stored within the module.
‘Working Values’ indicate the values currently in use (if not yet edited), or the values to be applied. To commit values press ‘Set’.
Module will reboot if data is valid, otherwise an error status will be displayed:
Status
State
Indication
‘Data Submitted...‘
Data has been submitted to OPT-2-ETHEG-IN, awaiting reply.
‘Data Read/Write Error’
An error occurred, data was not stored.
‘Resource Busy’
Another operation was accessing the required data for example a Ethernet/IP Class
0xF5 service.
‘Invalid request - Data Validation Error’ One or more data value were invalid.
‘Data Accepted - Restarting Module at
new IP Address...’
Data accepted and stored.
Operation
6
