INVENTOR ICI-12, Руководство пользователя

Страница: 32 / 63

30
™
In deleting timing status, press ▲ or ▼ button to
select one day of a week, and then press TIMER
button to confirm ,in which case, ”dd” is
displayed .The day also can be canceled by pressing
TIMER button without “dd” displayed. At last, press
ON/OFF button to quit the setting after finish.(Fig.15)
7）
Outdoor Ambient Temp Display ( Fig.16)
In normal condition, only indoor ambient temp is displayed
where “ENVIROMENT” is displayed. At on or off status of
the unit, if press SWING button for 5 seconds, outdoor
ambient temp (OUT ENV) will be displayed.
①
If outdoor temp is tested to be above zero, there will be
no display where setting temp is displayed and outdoor
ambient temp tested by inner system will be displayed
where ambient temp is displayed.
②
If outdoor temp is tested to be below zero, “
－
” will be
displayed where set temp is displayed and absolute
value of outdoor ambient temp tested by inner system
will be displayed where ambient temp is displayed.
After 10- second display, the system will return to
display interface of indoor ambient temp.
Note:
This unit function is invalid without connecting with
outdoor ambient temp sensor.
8
）
Energy Saving Setting (Fig.17)
Press FAN+ ▼ for 5 seconds into energy saving menu, in which case,
SAVE and COOL is displayed ( If it’s the first time for setting, initial
value 26 will be displayed.)
℃
,lower- limit temp is displayed where
Fig.16
Fig.15