INVENTOR ICI-12, Руководство пользователя

Страница: 14 / 63

1
1
1
)
Debug Function Setting
Debug Function Setting
When the unit is shut off, press the “FAN” key and the “SWING” key
Simultaneously to activate the debug menu. Now the LCD displays
“DEBUG”. Press the “MODE” key to select setting item and use
the( ) key or the ( ) key to set actual value.
Setting of Ambient Temp. Sensor
Under the debug mode , press the “MODE” key so as to display “01”
On the set temperature area (at the left of “DEBUG”). The OUT ENV
area (at the right of “DEBUG”) displays setting status. Now use the
( ) key or the ( ) key to select from the following two settings:
The indoor room temperature is measured at the air intake(Now the
OUT ENV area displays 01).
The indoor room temperature is measured at the wire controller (Now
the OUT ENV area displays 02).
The indoor room temperature is measured at the wire controller when
the mode is 'heating' or 'auto'. At other modes, it is measured at the
air intake (Now the OUT ENV area displays 03) ,The default is 03.
Ｒ
SWING
12