Excelerator XLT Series
30
Part No. 1114850
USING/REPLACING FOOTREST STRAP
WARNING
Footrest straps MUST be inspected BEFORE each use. Exposure to
moisture (ie.- wet weather or puddles) will damage fastening strips.
Footrest strap will not hold feet securely in footrest if fastening strips are
damaged. DO NOT operate handcycle if footrest straps are wet or
damaged, otherwise severe injury may occur.
Always wear shoes and securely strap feet in using straps provided.
Severe injury may occur if feet are not secured while the Excelerator is in
motion.
USING FOOTREST STRAP (FIGURE 3)
1. Place feet in footrests.
2. Secure feet to footrest strap using small fastening straps.
Fastening
Straps
Footrest
Footrest
Strap
FIGURE 3 - USING FOOTREST STRAP
REPLACING FOOTREST STRAP (FIGURE 4)
1. Pull apart fastening straps securing existing footrest strap to footrest.
2. Position the footrest strap around the inner footrest tube as shown in DETAIL "A"
of FIGURE 4.
NOTE: The small fastening straps should face UP.
3. Firmly connect the hook and loop portion of the footrest strap to secure the
footrest strap to the inner footrest tube as shown in DETAIL "A" of FIGURE 4.
4. Wrap end of footrest strap over and around the outer footrest tube and under the
inner footrest tube as shown in DETAILS "A" and "B" of FIGURE 4.
5. Press the end of the footrest strap against the portion of the footrest strap installed
onto the inner footrest tube as shown in DETAIL "B" of FIGURE 4.
6. Ensure the footrest strap is firmly attached to the loop fastening strip on the outer
footrest tube.
SECTION 5
RIDING
POSITION
RIDING POSITION
All manuals and user guides at all-guides.com