SERVICE MANUAL
Invacare
®
- Kite
116
9
Installing accessories
9.1
Replacing the holding strap
Requirements:
•
open-ended spanner, 13 mm
•
5 mm Allen key
Note
A nut is fixed between the two washers (2) and (4) as a spacer so that the belt mounting can
rotate freely.
•
Remove the plastic cap (5).
•
Loosen the bolt (3) and the associated nut
(in the figure this is covered by the plastic
cap) with a 5 mm Allen key and a 13 mm
socket spanner.
•
Remove the nut.
•
Remove the bolt including safety belt and flat
washers (2) and (4).
•
Remove the flat washers (4).
•
Replace the safety belt (1).
•
Refit the parts in the reverse order.