Invacare Concept 45 Скачать руководство пользователя

Страница: 50 / 60

10 ANTI-TIPPERS/WHEEL LOCKS

Invacare

Concept 45 Wheelchair

Part No. 1088191

Installing Anti-Tippers

Press the release buttons and insert the anti-tippers with the

anti-tipper wheels pointing toward the ground/floor into the

anti-tipper bracket.

Ensure that the release button of the anti-tipper fully protrudes out

of the hole in the bottom of the wheelchair frame tubing.

Place the wheelchair on a flat surface.

Measure the distance between the bottom of the anti-tipper wheels
and the ground/floor.

If the distance between the bottom of anti-tipper wheels and the
ground/floor is not 1

-1/2

to 2 inches, adjust anti-tippers. Refer to

Adjusting the Anti-Tippers on page 51.

FIGURE

Installing Anti-Tippers



The anti-tipper bracket is located on the axle mounting bracket.



A 1-1/2 to 2 inch clearance between the bottom
of the anti-tipper wheels and the ground/floor
MUST be maintained at all times.

Anti-Tipper Wheels

Anti-Tipper

Release Buttons

Anti-Tipper Bracket

Axle Mounting Bracket

Содержание Concept 45





























































Результаты поиска

Содержание Concept 45

Отзывы:

Похожие инструкции для Concept 45

Бренды по названию

Популярные бренды

Invacare Concept 45, Руководство пользователя

Результаты поиска

Содержание Concept 45

Отзывы:

Похожие инструкции для Concept 45

Бренды по названию

Популярные бренды