5 FRONT RIGGINGS
Part No. 1088191
35
Invacare
®
Concept 45 Wheelchair
5.2
Adjusting Footplate Height
1.
Remove the front rigging. Refer to Installing/Removing Front Riggings on page 34.
2.
Loosen, but do not remove, the hex head screw and locknut securing the footplate assembly to the legrest tube.
3.
Adjust the footplate assembly height by aligning the desired height.
4.
Securely tighten the hex head screw and locknut securing the footplate assembly to the legrest tube.
5.
Reinstall the front rigging. Refer to Installing/Removing Front Riggings on page 34
6.
Repeat STEPS 1-5 to adjust the remaining footrest.
FIGURE
2
Adjusting Footplate Height
This procedure applies to the swingaway front riggings and swingaway elevating legrest.
Lay the front rigging assembly on a flat surface to simplify this procedure.
Legrest Tube
Hex Head Screw
and Locknut
Footplate Assembly
Swingaway footrest shown.