10 ANTI-TIPPERS/WHEEL LOCKS
Part No. 1088191
49
Invacare
®
Concept 45 Wheelchair
10 Anti-Tippers/Wheel Locks
10.1 Installing/Adjusting Anti-Tippers
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.
WARNING
A 1-1/2 to 2 inch ground clearance between the bottom of the anti-tipper wheels and the floor MUST be maintained at all
times. If ground clearance cannot be achieved, DO NOT use the wheelchair. Contact a qualified technician.
Invacare strongly recommends that anti-tippers be used at all times.
Anti-tippers MUST be fully engaged and release buttons fully protruding out of the adjustment holes.
Ensure both anti-tippers are adjusted to the same mounting hole.
The manual wheelchair is intended for indoor and outdoor use on firm surfaces. When outdoors on wet, soft ground or on
gravel surfaces, anti-tippers may not provide the same level of protection against tip over. DO NOT operate on soft
surfaces such as sand, grass or gravel.