7 SEAT AND BACK
Part No. 1088191
39
Invacare
®
Concept 45 Wheelchair
7.2
Back Angle Adjustments
1.
Loosen the locking screws that secure the back cane to the seat
adjustment plates on both sides of the wheelchair.
2.
Reposition cane into one (1) of the five (5) mounting holes on the
seat adjustment plates to obtain 90°, 95°, 100°, 105° or 110°.
3.
Tighten the four locking screws.
FIGURE
2
Back Angle Adjustments
The necessary back angle MUST be selected
BEFORE repositioning the rear wheels forward
and adjusting the limit stops. Invacare DOES NOT
recommend adjusting the back angle after the rear
wheels have been repositioned forward. If the rear
wheels have been adjusted forward before the
necessary back angle has been achieved, the limit
stop on the gas cylinder MUST be adjusted.
Back Cane
Mounting Holes
Locking Screws
Seat
Adjustment
Plates
90°
Wheelchair
Frame
110°