Adjustable ASBA Seats
7.26
Adjusting the Angle of the Cantilever Arm
Access to the adjustment screw
A
is on the bottom of the
arm tube
B
.
1.
Adjust the cantilever arm
C
angle as necessary to accommodate
the user.
•
To adjust the arm angle down, turn the adjustment screw
clockwise.
•
To adjust the arm angle up, turn the adjustment screw
counterclockwise.
2.
Repeat STEP 1 to adjust the other cantilever arm (as necessary).
7.27
Adjusting the Back Angle
1.
Loosen, but DO NOT remove, the two lower hex screws
A
securing the cane brackets
B
to the back canes
C
.
2.
Remove the two upper hex screws
D
, washers
E
and locknuts
F
securing the cane brackets to the back canes.
3.
Align the upper mounting holes in the back canes with the
desired mounting holes in the cane brackets.
4.
Install the two upper hex screws, washers and locknuts to secure
the cane brackets to the back canes.
5.
Torque the locknuts to 13 ft-lbs.
50
1143192-L-03
