Monopolar Cautery Instrument
da Vinci SP Instruments and Accessories
34
DR
AFT/PRE-RELEASE/C
ONFIDENTIAL
12/5/19
Figure 6.5 Rotate the plastic component of the monopolar cautery tip (A), and confirm it is
properly connected (B)
5. Pull up on the installation tool to remove it from the monopolar cautery tip (
A and B). Retain the installation tool to aid in removing the monopolar cautery tip after
the procedure.
Figure 6.6 Pull up on installation tool to remove from monopolar cautery tip (A and B)
6.3 Intraoperative Use
Monopolar Instruments and EnergyShield Monitor Use
on page
, for intraoperative
use information.
6.4 Postoperative Instructions
This section describes information specific to monopolar cautery tip removal. Refer to
on page
, for full postoperative instructions.
Remove the Monopolar Cautery Tip
Remove the monopolar cautery tip from the instrument after each procedure.
A
Monopolar cautery tip
plastic component
B
Properly connected
monopolar cautery tip
plastic component
B
A