da Vinci SP Instruments and Accessories
da Vinci SP Port Accessories
63
DR
AFT/PRE-RELEASE/C
ONFIDENTIAL
12/5/19
9
da Vinci SP Port Accessories
9.1 Introduction
This section contains instructions for use specific to the da Vinci SP® port accessories
(da Vinci SP Cannula, da Vinci SP Obturator, and EntryGuide™ Kit) used with the
da Vinci SP System.
Note: Reusable SP Cannulas and obturators are shipped non-sterile unless
otherwise indicated in the device’s labeling. Clean and sterilize before use.
Intended Use
For intended use of the port accessories, see
Appendix D: Intended Use Statements
.
Cautions for Single-Use Items
CAUTION:
DO NOT RE-STERILIZE.
DO NOT RE-USE.
Reprocessing and/or reuse of products intended for single use only may result in
degraded instrument performance or loss of functionality, and in exposure to viral,
bacterial, fungal, or prionic pathogens.
CAUTION:
Do not use if package is damaged.
CAUTION: A breach in the sterile packaging of the device indicates possible
contamination. Do not use the device if the packaging is not intact.
9.2 Device Description
Compatibility Information
shows compatible products used with the da Vinci SP System.
Table 9-1 da Vinci SP Port Accessory Compatibility
SP Cannula PN
SP Obturator PN
EntryGuide Kit PN
SP Cannula, Circular,
25 mm x 100 mm
(430036)
SP Obturator, Circular,
25 mm x 100 mm
(430016)
EntryGuide Kit C.6.6.6, 25 mm x 100 mm
(includes EntryGuide Cannula Insert and
EntryGuide Cannula Seal)
(430022)