Operation Manual 5280 EPSHP
55
8.4 Adjusting the parallelism of backguage
Depending on the required inclination of backguage, it must be adjusted using drawings 40
and 41,
Drawing. 40 How to remove the cover
To adjust backguage:
8.4.1 unscrew the screws 1 (fig.40)
8.4.2 remove the cover 2 (fig.40)
8.4.3 loosen the screws 1 (fig.41)
8.4.4 loosen the nuts 2 (fig.41)
8.4.5 by turning the screws 3, place the backguage 4 (Fig. 41) at the right angle
8.4.6 lock the adjustment screws with 3 nuts 2 (fig.41)
8.4.7 firmly tighten the screws 1 (fig.41)
After the cutting attempt, repeat the adjustment until the parallel cutting is achieved.
