Operation Manual 5280 EPSHP
37
Fig. 19 Operating and signaling elements used during cutting.
Cutting can be done if:
1. there is no object in the work area of the light barrier - the green OSSD 1 LED lights
up (Fig.11) on the receiver 1 (Fig.19).
2. the green push button switch 2 is pressed.
3. the two buttons 3 were pressed simultaneously.
Keep both buttons 3 until the material is cut.
The return of the knife and its stop in the upper return position and the movement of the
pressure beam upwards is automatic.
Releasing the buttons 3 during the movement of the pressure beam and the knife downwards
interrupts this movement. If an object gets caught in the light barrier working area, the
pressure beam and the knife will stop moving. To continue cutting, remove the unauthorized
item and simultaneously restart both buttons 3.
Paper clips or other hard objects can damage the blade!
