Intex PureSpa SB-HW10 Скачать руководство пользователя страница 24

Страница: 24 / 27

346

S AVE THESE INSTRUCTIONS

(346PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/10/2019

English

Page 24

TROUBLESHOOTING

PROBLEM

CAUSE

SOLUTION

NO DISPLAY/SPA
CONTROL UNIT
DOES NOT WORK

• Spa is unplugged or off.
• Control panel cable plug loose.
• Power failure.
• GFCI/RCD tripped.
• GFCI/RCD broken.

• Ensure the spa is plugged and switched on.
• Ensure the control panel cable plug is

rmly

attached to the control base receptacle.

•  Check power source.
•  Reset the GFCI/RCD.
•  Contact Intex Service Center.

HOUSEHOLD
CIRCUIT BREAKER
TRIPPED

•  Circuit breaker under rated.
•  Overloaded circuit breaker.
•  An electrical fault in the line.

• Ensure correct circuit breaker rating.
• Provide a dedicated circuit breaker feeding the

spa electrical outlet only.

• Contact a qualify electrician to correct the

electrical fault.

NOT HEATING
PROPERLY

• Temperature set too low.
• Dirty

lter cartridge.

• Water temperature decreasing during

heater STANDBY mode.

• Heating element failed.

• Increase the temperature and attach the spa

cover.

• Clean or replace the

lter cartridge in time.

• If heater is in STANDBY mode, press the

ame

button twice to heat up the water to the set
temperature.

• Contact Intex Service Center.

BUBBLE AIR
BLOWER DOES
NOT WORK

• Air blower pump is too hot.

• Turn off and unplug the spa. Let it cool down and

restart all over again.

• If problem persists, contact Intex Service Center.

FILTRATION PUMP
NOT WORKING

• Dirty

lter cartridge.

• Filtration inlet and/or outlet clogged.
• Filter pump motor failed.

• Clean or replace the

lter cartridge in time.

• Check and clean

ltration inlet and outlet

regularly.

• Contact Intex Service Center.

WATER NOT CLEAN • Cartridge assembly not properly

attached.

• Insuf

cient

ltering time.

• Dirty

lter cartridge.

• Improper water maintenance.
• Filtration inlet and outlet clogged.

• Ensure the cartridge assembly is properly

attached.

• Increase

ltration time.

• Clean or replace the

lter cartridge in time.

• Keep the spa water properly sanitized. Refer to

the chemical manufacturer’s instructions.

• Check and clean

ltration inlet and outlet

regularly.

PUMP
CONNECTORS
ARE NOT LEVEL
WITH THE SPA
CONNECTORS

• One characteristic of PVC is that it

changes shape, which is normal.

• Elevate the pump with wood or another type of

insulated material to bring the pump’s connectors
level with the spa’s connectors.

TUB HAS A
STRANGE SHAPE

• Expanded internal air pressure by

strong sunshine.

• Do not expose the spa to direct sunlight for

extended period of time.

• Check the air pressure and release air if

necessary. During very hot weather, you must
check to see whether it is necessary to release
some air. This is to avoid any possible damage
to the tub.

Содержание PureSpa SB-HW10




























Результаты поиска

Содержание PureSpa SB-HW10

Отзывы:

Похожие инструкции для PureSpa SB-HW10

Бренды по названию

Популярные бренды

Intex PureSpa SB-HW10, Руководство пользователя

Результаты поиска

Содержание PureSpa SB-HW10

Отзывы:

Похожие инструкции для PureSpa SB-HW10

Бренды по названию

Популярные бренды