346
PO
S AVE THESE INSTRUCTIONS
(346PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/10/2019
English
Page 11
SET UP (continued)
The spa tub in
fl
ation/de
fl
ation valve incorporates an “air pressure release” function that automatically
releases excess air when the spa tub internal pressure is between 1.5 - 2.5 psi (0.103 - 0.172 bar).
Air pressure release valve.
Colder temperatures at night
cause the spa to seem less
in
fl
ated.
Air expands in the midday
heat and correct air
pressure is restored.
Air expands in the midday heat.
Air pressure release valve kicks
in and releases excess air.
In
fl
ation of spa in the morning.
IMPORTANT
Defl ation
For Spa Tub Wall:
1.
Unscrew the cap to reveal the stem, push the stem in and turn
90 degree right to secure it in the down position
(see drawing 9)
.
2.
Once the de
fl
ation is completed, push the stem in and turn 90
degree left to return it to the in
fl
ation position.
3.
Replace the cap back.
NOTE:
To de
fl
ate the spa tub for storage, see “STORAGE” section.
For Cover Air Bladder:
1.
Pull valve cap out and squeeze the valve at its base until de
fl
ated.
2.
Close and recess the valve back.
9
