Simpli Series System Instructions for Use
12
01-5034-00 R1
Store the probe under the following ambient conditions:
•
Temperature:
-10°C to 50°C (14°F to 122°F)
•
Relative humidity:
20% to 80% (no condensation)
•
Atmospheric pressure: 700 hPa to 1060 hPa
Transportation
•
Never carry the probe by the cable. The cable could disconnect from the probe allowing it to
drop and possibly damaging the probe.
•
Never bend the USB cable in a tight radius. This could result in damage to the cable.
•
Transport the probe under the following ambient conditions:
o
Temperature:
-10°C to 50°C (14°F to 122°F)
o
Relative humidity:
20% to 80% (no condensation)
o
Atmospheric pressure: 700 hPa to 1060 hPa
•
When transporting the probe to a different field location, use the carrying case or enclosure that
the probe was originally packaged in.
•
Call Interson for a Return Material Authorization (RMA) number before returning a probe for
evaluation and possible repair.
•
When returning for repair, return probe in original package. If the original package is not
available, contact Interson for the best packaging method prior to sending a probe in for
evaluation and possible repair.
Disposal
1.
Contact Interson Corporation before disposing of the probe(s).
2.
Concerning the WEEE label:
The following information is for EU member states:
The use of this symbol indicates that this product should not be treated as household waste. By
ensuring that this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste-handling of this product. For more information concerning the return and
recycling of this product, please consult Interson Corporation.
Troubleshooting
If a problem is experienced with the USB probe, try the suggestions as listed below:
No image:
1.
Disconnect the probe, exit the program and turn off the computer.
2.
Turn on the computer, reconnect the probe and restart the program.
Image not clear:
1.
Adjust the image controls in the system controls area of the imaging display by changing gain
and/or contrast.
Error messages:
1.
Repeast all steps listed in “No image.”
