Interroll 24 V belt conveyor straight / curve
BM 8350 / BM 8360
Maintenance and repair
48
Version 1.1 (02/2016) en-US
Translation of original instruction manual
Replacing the conveyor belt
Replacing the conveyor
belt in the straight section
1
1
7
3
2
6
4
5
Replacing the conveyor belt for the 24 V belt conveyor straight
1
Side cover
5
Drive roller
2
Tensioning roller
6
Carrying idlers
3
Conveyor belt
7
Tensioning device
4
Closing clip
Requirement:
R
The module is out of operation.
4
Remove the side cover (1) on both sides.
4
Loosen belt tension in the respective zone,
See "Adjusting belt tension in straight section",
page 38
.
4
Remove all carrying idlers (6) in the respective zone,
See "Replacing the carrying idler in the
straight section", page 40
.
4
For drive roller (5) in the respective zone: Loosen ribbed nut on the cable side (do not
remove) and remove closing clip on the non-cable side,
See "Replacing the drive roller in the
straight section", page 44
.
4
Remove nuts and tensioning screw of the tensioning device (7) on both sides.
4
Loosen eyebolts of the tensioning roller (2) and the adjacent carrying idler on the cable side
(do not remove) and completely unscrew on the non-cable side,
See "Replacing the tensioning
roller in the straight section", page 42
.