Interroll 24 V belt conveyor straight / curve
BM 8350 / BM 8360
Installation
Version 1.1 (02/2016) en-US
Translation of original instruction manual
27
For installing the side guide profiles on the 24 V belt conveyor curve, rigid universal supports are
used on the inside and flexible universal supports on the outside.
The installation of the side guide profiles (1) is done in several steps:
4
Attach rigid universal support (5) to side frames,
.
See "Installing the rigid universal support", page 27
.
4
Attach flexible universal support (4) to side frames,
See "Installing the flexible universal support", page 28
.
4
Fasten side guide profiles (1) to side guide supports,
See "Fastening the side guide profile on
the universal support", page 30
.
Installing the rigid universal support
1
2
3
4
1
Rigid universal support
3
Nuts
2
Side guide support
4
Hexagon head screws
The rigid universal support is installed on the perforated profile of the side frame from the top.
Requirement:
R
The module is out of operation.
4
Loosen the side cover at the module.
4
Position the rigid universal support and place it on the perforated profile of the side frame.
4
Fasten the rigid universal support with two hexagon head screws and two nuts.
4
Reattach the side cover.