Interroll 24 V belt conveyor straight / curve
BM 8350 / BM 8360
Installation
Version 1.1 (02/2016) en-US
Translation of original instruction manual
25
4
To connect sections for irregular pitches, use profile connectors with elongated holes and
without punch pressing.
4
Position the modules to be connected so that the side frames (4) are aligned.
4
On the insides of the modules to be connected, place one profile connector (3) each at the
side frames. The noses of the profile connectors must catch in the elongated holes of the side
frames.
4
Fasten profile connectors to the perforated profiles at the side frames using screws (2). Use
four screws on each side for every module.
4
Anchor or fasten the module torsion-free, e.g. to the floor or adjacent components.