Interphase PC/View, Руководство по эксплуатации

Страница: 12 / 56

12
It is important to note that if the vertical scanning
transducer is not mounted so that the fore and aft
direction is parallel to the surface, then the
forward-looking display may be distorted where
flat bottoms appear to be slanted upwards or down-
wards. After mounting the transducer and actually
using the PC/View on the water, you may need to
readjust the transducers' mounting for optimum
performance.
Refer to the discussion of Transducer Mount Cor-
rections on page 24.
Waterline
Transducer
must be
mounted
vertically
Rear
View
Side
view
Waterline
Flat area on top of
transducer must be
level with waterline
Mount Transducer So it Will Scan Properly
NOTE
The flat top of the transducer must be
parallel to the water line. This will not
necessarily be parallel to the boat’s hull.