Interphase iSPAN, Руководство пользователя

Страница: 68 / 236

Setting Up Network Protocol Properties
48
Interphase Corporation
To set up IPX/SPX properties for the NDIS logical adapter, do
the following:
1. In the Adapter field, select Interphase 5535 NDIS
Adapter .
2. Select the Manual Frame Type Detection option and
click Add .
3. On the Manual Frame Detection dialog box, select the
Ethernet II frame type (mandatory), and assign a
network number to this adapter interface.
A message informs you that a different number must be
assigned for each adapter installed. Assigning a unique
number for each adapter enables you to access different
networks.
4. Click OK .
After you complete the IPX/SPX configuration, continue as
follows:
• If the TCP/IP protocol is installed, the TCP/IP
Properties dialog box appears. Continue to the next
section,
Setting Up TCP/IP Protocols .
• If the TCP/IP protocol is not installed, skip to
Completing the Software Installation on page 51 .