Interphase iSPAN, Руководство пользователя

Страница: 113 / 236

Chapter 5: Setting Up the NDIS Driver
iSPAN Serial WAN Adapter Users Guide
93
2. In the Channels section of the NDIS Driver Setup dialog
box, select the channel and click
( Delete ).
Manually Connecting a Channel
A channel connection is usually established automatically
when LAN frames are routed to the NDIS driver. You can
manually create a channel connection to use for testing the
physical port connection and WAN protocol level.
To manually connect a channel, do the following:
1. If needed, start the NDIS driver Setup utility, as
described in
Starting the NDIS Driver Setup Utility on
page 64 .
2. In the Channels section of the NDIS Driver Setup dialog
box, select the channel and click
( Activate ).
N
OTE
The Activate button is enabled only when you select
outgoing call channels with a disconnected status.
Manually Disconnecting a Channel
A channel connection is usually disconnected automatically
due to inactivity. You can manually disconnect a channel to use
for testing the physical port at the WAN protocol level.