Section 2, Mounting The WaterHeater™ by ITR
2.2 Identifying The WaterHeater™ by ITR
Model
As the owner, you must be fully aware of the controls and
operating features particular to your model of The WaterHeater™
by ITR. This is essential for the proper functioning and life of The
WaterHeater™ by ITR as well as protecting your warranty. Your
model can be identified by locating the serial number label on the
outside case of The WaterHeater™ by ITR. The serial number
identifies the model type through the first series of letters and
numbers.
The types of The WaterHeater™ by ITR models are:
HWH – The WaterHeater™ by ITR
2.3 Your Mounting Location
Your mounting location should consider the following:
•
Mounting location must be able to support double the
gross weight of The WaterHeater™ by ITR (i.e.
150 lbs. x 2 = 300 lbs/68 KG x 2 = 136 KG) and must be
of a non-combustible surface.
•
The WaterHeater™by ITR is 14”H x 14”W x 24”D
(35.6 cm x 35.6 cm x 60.9 cm). See Figure 2-1:
Dimensions.
The WaterHeater™ by ITR must not be installed in any compart-
ment with flammable gases.
! CAUTION
•
The WaterHeater™ by ITR must be completely isolated
from living spaces. Combustion air must be drawn from
an outside source and cannot contain any combustible
gases.
•
The WaterHeater™ by ITR must be mounted in an area
that provides unrestricted access to the front panel
mounted fuel and water connections, and top mounted
power and exhaust connection (minimum of 10” top
clearance – top exhaust version; and, minimum of 6” top
clearance – bottom exhaust version) and 3” clearance to
all other WaterHeater™ surfaces.
2-2
The WaterHeater™ by ITR
