Section 8, Operating the Oasis
®
Chinook Heating System
8-10
The Oasis
®
Chinook Heating System
AC Element Switch (Supplemental Heat Source)
·
The triple position AC element switch controls the activation
of a single 120 VAC immersion element only, dual 120 VAC
immersion elements jointly, or both elements off. The AC
heat LED will turn ON to indicate when the element(s) are
operating.
Engine Pre-Heat Switch (optional)
·
The engine pre-heat switch (optional) controls the ON/OFF of
the engine pre-heat pump (optional). However, the engine
pre-heat pump (not included) will not function unless the
coolant in the Oasis
®
Chinook Heating System has achieved a
preset temperature.
Burner LED (Green)
·
When ON, indicates the diesel burner has been activated.
AC Heat LED (Green)
·
When ON, indicates one or both of the 120 VAC immersion
elements(s) are operating.
Heating Module Fault LED (Red)
·
When ON, indicates the Oasis
®
Chinook has faulted. The
specific fault can be identified by examining the Control Panel
located on the front of the Oasis
®
Chinook. There are
indicator LED’s on the panel that are used for diagnostics.
Refer to the description of the Oasis
®
Chinook Control Panel
(section 8.10) for further details.
Zone Fault LED (Red)
·
When ON, indicates a space heating zone(s) has faulted. The
specific fault can be identified by examining the Zone Control
Board located beside the Oasis
®
Chinook. There are indicator
LED’s on the panel that indicate the problem. Refer to the
description of the Zone Control Board (section 8.11) for
further details.
