Appendix B — Media Specifications
78
EasyCoder PD42 Printer User’s Guide
Tickets With Black Mark
* This is the print length limit set by memory constraints.
Paper Type Setup
• Tickets with Mark
a: Media Width
Maximum:
118.0 mm
4.65 inches
Minimum:
25.0 mm
1.00 inches
b: Copy Length
Fingerprint
IPL
8 dots/mm (203 dpi)
Maximum:
1270 mm (50 in.)*
600 mm (23 in.)
Minimum:
6 mm (0.2 in.)
6 mm (0.2 in.)
11.81 dots/mm (300 dpi)
Maximum:
558.8 mm (22 in.)* 406.4 mm (16 in.)
Minimum:
6 mm (0.2 in.)
6 mm (0.2 in.)
c: Detection Position
Variable:
0 to 57 mm
0 to 2.24 inches
d: Black Mark Width
The detectable width of the black mark should be at least 5.0 mm (0.2
inches) on either side of the Label Gap Sensor detection point.
e: Black Mark Length
Maximum:
25.0 mm
0.98 inches
Minimum:
3 mm
0.12 inches
Common:
5 mm
0.2 inches
f: Black Mark Y-Position
It is recommended that you place the black mark as close to the front
edge of ticket as possible and use a negative Stop Adjust value to
control the media feed, so the tickets can be properly torn off.
Содержание EasyCoder PD42
