Intermec 6950, Руководство пользователя

Страница: 12 / 144

SECTION 2 Introduction
2-2 6950 Enterprise Gateway Server User’s Guide
"
An RCB4030 Base/Controller connected through the
6950 EGS serial (COM1) port to its host port.
"
A RC3250 Network Controller connected through the
6950 EGS serial RSĆ232 port (COM1) to its host port.
The base radio connects to the network controller.
This method supports UHF radio systems using
RSĆ485 or RSĆ232 communication with the controller.
The 6950 EGS simultaneously supports 3270, 5250, and
VT220 terminal emulation by the wireless stations. The
wireless station's firmware sets the type of terminal
emulation. Messages between the wireless station and the
6950 EGS set the communication method.
Quick Start
"
NOTE: For help with configuring the wireless station, RB4030 Base Radio,
or RC3250, RC4030, or RCB4030 serial controller, refer to the
device’s user guide for instructions.
Enterprise Wireless LAN Systems
(Non-RB4030 Base Radio) Over Ethernet
(Page 3Ć3 shows an example of this type of system.)
1. Set the wireless stations' host name to HOST".
2. Set the wireless stations' LAN ID to match the LAN
ID for the 2100 Universal Access Point (UAP) or 6710
Access Point.
3. Set the wireless stations' terminal emulation type to
3270, 5250, or VT220.
4. If running 3270 or 5250, enable the wireless stations'
Telnet" option.
5. Configure the 6950 EGS's IP setup (see Section 5 for
help) .