38
3
INTRODUCTION
The Intermatic Multipurpose 24-Hour Control is an
easy to program three-circuit mechanism capable of
automatically switching loads according to a preset
daily schedule and providing control over a variety
of different applications. This control is designed to
switch resistive loads up to 17 amps, and can handle
single phase motor loads up to 17 Full Load Amps (FLA)
for each individual circuit. Its unique preprogrammed
(MODE) selections allow you to customize your control
from the simplest of applications such as lighting,
heating, or air conditioning, to the more sophisticated
pool or spa pump and light applications. Its extended
features list such as the freeze control sensor or remote
control allows you to add on those features at anytime.
Designed as a mechanism, the Intermatic multipurpose
control can be installed in any existing Intermatic panel
or rain tight enclosure in the industry today. We are
confident you will find this control to perform to your high
expectations, and continue to watch for new innovations
from Intermatic Inc.
IMPORTANT NOTE
This Owners Manual is designed to demonstrate the
installation and operating procedure for the new
Multipurpose Control into any Intermatic panel. If
your Intermatic panel is designed with the new low
voltage raceway, the corrugated tubing included
with this control is not required to be installed.
Simply use the raceway in place of the tubing for
all low voltage accessories.
Notes
