P/N 146414999-
2 (ML) • REV G • ISS 08MAR19
5 of 26
•
Put the appropriate mirror stickers if necessary. See
Figure 8, item 1 for details.
Caution:
Removing stickers can damage the mirror
surface.
•
When near objects directly under the detector, fit the mask
to the inside of the window (default). This disables the part
of the curtains looking down at the object, whose
closeness might destabilize the detector. See Figure 8,
item 2.
LED indication
Continuously on
Normal blinking (1 Hz)
Fast blinking (4 Hz)
PIR
Red LED
Alarm relay
To reset
Start up
Closed
Automatically after 25 s
Low voltage
Open (Alarm) Apply correct voltage
PIR intruder
alarm
Open (Alarm) Automatically after 3 s
PIR/AM
Red
LED
Yellow
LED
Alarm
relay
AM
relay
To reset
Start up
Closed
Closed
Automatically
after 60 s
Low voltage
Open
(Alarm)
Open
(Alarm)
Apply correct
voltage
PIR intruder
alarm
Open
(Alarm)
Automatically
after 3 s
Latched PIR
(Memory)
Switch to Night
mode
AM alarm
Open*
(Alarm)
Open
(Alarm)
See DIP
switch 3
After AM
reset
Switch to
Night mode
Technical
fault
Open
(Alarm)
Do a successful
walk test
* Depends on the setting of the DIP switch SW4.
Specifications
VE1012
VE1012AM
Detector
PIR
PIR + AM
Signal processing
V2E
Range
12 m (39 ft. 4 in.)
Optical
9 high-density mirror curtains
Memory
No
Yes
Input power
9 to 15 V
(12 V nominal)
Peak-to-peak ripple
2 V (at 12 V
)
Detector start-up time
25 s
60 s
Normal current consumption
5.5 mA
10 mA
Current consumption in alarm
1.1 mA
3.8 mA
Maximum current consumption
11 mA
24 mA
Mounting height
1.8 to 3.0 m
(5.9 to 9.8 ft.)
2.0 to 3.0 m
(6.6 to 9.8 ft.)
Target speed range
30 cm/s to 3 m/s
(1 ft./s to 10 ft./s)
20 cm/s to 3 m/s
(8 in./s to 10 ft./s)
VE1012
VE1012AM
Alarm (NC) / Tamper relay
characteristic
80 mA, 30 V
80 mA, 30 V
Pry-off tamper
Optional
On-board (Yes)
AM relay characteristic
—
80 mA at 30 V
max.
Alarm time
3 s
Operating temperature
−10 to +55°C (14 to 130°F)
Dimensions (H x W x D)
108 × 60 × 46 mm
(4.25 × 2.36 × 1.81 in.)
Relative humidity
95% max.
Weight
120 g (4.2 oz.)
128 g (4.5 oz.)
IP/IK rating
IP30 IK02
Regulatory information
Manufacturer
UTC Fire & Security Americas Corporation, Inc.
3211 Progress Drive, Lincolnton, NC, 28092, USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Product warnings
and disclaimers
THESE PRODUCTS ARE INTENDED FOR
SALE TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. UTC FIRE & SECURITY
CANNOT PROVIDE ANY ASSURANCE THAT
ANY PERSON OR ENTITY BUYING ITS
PRODUCTS, INCLUDING ANY
“AUTHORIZED
DEALER
” OR “AUTHORIZED RESELLER”, IS
PROPERLY TRAINED OR EXPERIENCED TO
CORRECTLY INSTALL FIRE AND SECURITY
RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/ or scan the QR code.
Certification
European Union
directives
UTC Fire & Security hereby declares that this
device is in compliance with the applicable
requirements and provisions of the Directive
2014/30/EU and/or 2014/35/EU. For more
information see www.utcfireandsecurity.com or
www.interlogix.com.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.utcfssecurityproducts.eu/recycle/
Contact information
www.utcfireandsecurity.com or www.interlogix.com
For customer support, see www.utcfssecurityproducts.eu
