Interlogix UltraView PTZ, Руководство по установке

Страница: 63 / 68

53
Table 12. VCL commands supported
Command Note
Access menu mode Preset 95
Set preset out of GUI See VCL keypad documentation
Call preset # See VCL keypad documentation
Start tour # See VCL keypad documentation
Turn 180 degrees See VCL keypad documentation
Toggle autoiris See VCL keypad documentation
Toggle autofocus See VCL keypad documentation
Manual day/night Aux key
Power reset See VCL keypad documentation
Camera reset See VCL keypad documentation
Define a mimic tour See VCL keypad documentation
Table 13. Vicon commands supported
Command Note
Set preset out of GUI See Vicon keypad documentation
Go to preset XX See Vicon keypad documentation
Enter into menu mode set preset 94
Left pan limit AUX2
Right pan limit AUX3
Autopan A/P
Autoiris A/I
Run preset tour 1-4 Set preset 80-83
Run learn tour 1-4 Set preset 84-87
Show splash screen AUX1
Day/night toggle AUX4
Flip (rotate 180 degrees) AUX5
Table 14. AD RS-422 commands supported
Command Note
Access menu mode 94 view
Set preset out of GUI See AD keypad documentation
Call preset # See AD keypad documentation
Start tour # Enter #, ‘Pattern’ key
Turn 180 degrees Flip’ key