Interlogix TruVision TVP-5104, Руководство по настройке

Страница: 45 / 82

TruVision IP PTZ Camera Configuration Manual 43
Alarm output
To define an alarm output:
1. From the menu toolbar, click Camera Configuration > Alarm/Events Setup >
Alarm Output .
2. Select one alarm output channel from the Alarm Output drop-down list. You can
also set a name for the alarm output.
3. The delay time can be set to 5 s, 10 s, 30 s, 1 min, 2 min, 5 min, 10 min, or Manual.
The delay time refers to the time duration that the alarm output remains in effect
after alarm occurs.
4. Set the arming schedule for the alarm output. See “Motion detection alarms” on
page 39 for more information on scheduling.
5. To copy the alarm setup to another alarm input, select one of the options shown
under Copy to Alarm .
6. Click Save to save changes.
Exception alarms
You can set up the camera to notify you when irregular events occur and how you
should be notified. These exception alarms include:
• HDD Full: All recording space of NAS is full.
Note: As the SD card is in overwrite mode by default, it will never trigger a HDD Full
alarm.