Interlogix TruVision TVP-5104, Руководство по настройке

Страница: 26 / 82

24 TruVision IP PTZ Camera Configuration Manual
Auto Scan Speed The camera provides five scan modes: auto scan, tilt scan, frame
scan, random scan and panorama scan. The scan speed can be
set from level 1 to 40.
Max. Tilt Angle Define the maximum tilt angle of the lens. There are sixteen
options: -15 to 90, -14 to 90, -13 to 90, -12 to 90, -11 to 90, -10 to
90, -9 to 90, -8 to 90, -7 to 90, -6 to 90, -5 to 90, -4 to 90, -3 to 90, -
2 to 90, -1 to 90, 0 to 90.
Zooming Speed Define the zooming speed. The zooming speed can be set from
level 1 to 3.
2. PTZ OSD:
Set the on-screen display duration of the PTZ status.
Zoom Status Set the OSD duration of zooming status as 2 seconds, 5 seconds,
10 seconds, Always Close, or Always Open
PT Status Set the azimuth angle display duration while panning and tilting as 2
seconds, 5 seconds, 10 seconds, Always Close, or Always Open.
Position Display Format Set the display format for the position.
PT: shows the pan and tilt angle
Direction: shows the direction of the PTZ
Preset Status Set the preset name display duration while calling the preset as 2
seconds, 5 seconds, 10 seconds, Always Close, or Always Open.
3. Power-off Memory: The dome resumes its previous PTZ status or actions after it
restarts from a power off. You can set the time point at which the
dome resumes its PTZ status. You can set it to resume at 30
seconds, 60 seconds, 300 seconds, or 600 seconds before power
off.
3. Click Save to save changes.
Limit camera movement
The camera can be programmed to move only within a defined area. It can be limited in
how much it can move left/right and up/down. This can be useful when you do not want
an area, such as a neighboring building, to be included in the camera view.
To define the limit stop parameters:
1. From the menu toolbar, click Camera Configuration > PTZ > Limit .