Interlogix TruVision TVP-5104, Руководство по настройке

Страница: 42 / 82

40 TruVision IP PTZ Camera Configuration Manual
1. Area Settings : Define the on-screen area that can trigger a motion detection alarm
as well as the detection sensitivity level (see Figure 11, item 1).
2. Arming Schedule : Define the schedule which the system detects and records
motion (see Figure 11, item 2). See “Recording schedule” on page 56 for further
information.
3. Actions : Specify the method of response to the alarm (see Figure 11, item 3).
To set up motion detection:
1. From the menu toolbar, click Camera Configuration > Alarm/Event Setup >
Motion Detection .
2. Select Enable Motion Detection . Select Enable Dynamic Analysis for Motion if
you want to see in live view where the detected motion has occurred.
Note: Deselect the “Enable Motion Detection” option to disable the motion detection
alarm.
3. Click Draw Area . Click and drag the mouse on the live video image to draw an area
sensitive to motion detection.
4. Click Stop Drawing to finish drawing. Click Clear All to delete all areas marked and
restart drawing.
5. Move the Sensitivity slider to set the sensitivity of the detection. All areas will have
the same sensitivity level.
6. Drag and click the time bar to edit the arming schedule.
Enter the start time (hour and
minutes) Enter the end time (hour and minutes)
7. Click to copy the schedule to other days or to the whole week.
8. Specify the actions when an event occurs. Select one or more response actions for
the system when a motion detection alarm is triggered.
Notify Surveillance Center Send an exception or alarm signal to remote management
software when an event occurs.
Send Email Sends an email to a specified address when there is a motion
detection alarm.
Upload to FTP/Memory
Card/NAS Capture the image when an alarm is triggered and upload the
picture to NAS or FTP server.